Internal Natural Stone Carpet Flooring

Stone carpet is an internal flooring system. It uses fine-grade natural stone aggregates, bound together with resin, to make a smooth, seamless floor. It’s designed specifically for interior environments, including both residential and commercial spaces. 

While stone carpets use similar technology to exterior resin bound driveways, it’s important not to confuse the two. There are key differences in the aggregate, binding and sealing agents that mean the two are not interchangeable.

Filter

Sort by

Regular price £7.75
Regular price £7.75
Regular price £7.98
Regular price £7.46
Regular price £7.98
Regular price £7.93

What is internal natural stone carpet flooring? 

A stone carpet floor consists of natural stone aggregates mixed with a resin binder and trowelled smooth over a pre-prepared base. When finished, it creates a seamless surface layer of natural stone. 

Internal stone carpets mostly use quartz or marble as their aggregate. These offer a great blend of toughness and aesthetics. Quartz is one of the hardest materials available; marble isn’t quite so hard, but is still very resilient. Both come in a range of colours, and quartz can be dyed for a wide variety of tones. And they’re angular, which helps them to lock together. 

Whatever the material, stone carpets use fine-graded aggregate from 1 - 3 mm, rather than the combination of sizes used in outdoor resin surfaces. This makes patterns more uniform, and it makes the resin floor more comfortable to walk on. On the other hand, the smaller stones mean an indoor carpet won’t bear as much weight as an outdoor surface. But it’s still more than strong enough for indoor use. Smaller stones also mean installers can use thinner layers, which means faster curing times and quicker installation.  

Stone carpet flooring also requires a different type of sealant to outdoor surfaces. Because it needs to be impermeable, indoor sealer fills all the pores to make the floor completely waterproof. 

What are the benefits of stone carpet flooring?

Why would you choose a stone carpet floor over something more traditional like tiles or vinyl? 

Seamless finish

Because it’s spread with a trowel, there are no joins or seams in a stone carpet floor. And it can easily be fitted into awkwardly shaped rooms. This gives it a premium, contemporary style. 

Durable and hard wearing

Stone carpet floors are tough. They’re often used in commercial spaces where they get a lot of foot traffic, so they’re plenty strong enough for a kitchen or bathroom. 

Easy to maintain

As long as the floor is properly sealed, it’s easy to keep clean because no dirt or liquid can get into the pores. 

Aesthetic flexibility

You can choose from a wide range of natural stone colours and blends, which can be mixed further to create unique visual finishes. 

Underfloor heating compatible

Because it’s a thin layer (usually between 12 and 18 mm for domestic applications) stone carpet flooring works well with underfloor heating. 

How is internal stone carpet installed? 

Because it doesn’t need to be permeable, stone carpet doesn’t need a special sub-base like VubaMac. It’s fine to install it over a regular concrete or screed floor. But, it is vital that the base is well prepared and level, as cracks or uneven surfaces could lead to problems with the stone floor later. 

Once thebase has been smoothed and any cracks filled in, a special primer is applied. Quartz sand is spread over this while it’s still tacky to create a secure bond for the main floor surface. 

Then, the two-part binder is mixed, and the aggregate is added. This needs to be mixed until every stone is fully covered in resin. While it’s still wet, the mix is poured on to the floor and smoothed with a trowel. 

When the surface is dry, VubaSeal Stone Carpet is applied. Traditionally, stone carpets needed a two part process to fully seal. With Vuba, a single pass seals the surface completely, which makes the process much more efficient.

We give a 20-year warranty to our products and you can expect a longer life expectancy. When installed correctly, resin bound is incredibly durable and resilient. We work with over 100 ethical, competent and experienced approved installers.


Aggregate blends are mixtures of various types and sizes of aggregate (stones/gravel) that are combined with resin to create durable and versatile surfacing solution. These blends typically consist of aggregates such as quartz, granite, marble mixed with our Vuba Resin Binder.
Different sizes and colours are used which knit together and create compaction which is very important for durability especially for vehicle traffic.


Should your driveway already be in good condition, a resin bound overlay would cost around £60-£80 per sqm. If the removal of your existing driveway is required, installation of a new permeable base as well as the resin bound overlay, this would cost approximately £120-£160 per sqm. Locations, material fluctuations, edging patterns and borders can all have an impact on price.


The resin encapsulated stones hold dirt a lot less than porous black paving or concretes, making for a much easier cleaning experience. Vuba Resin bound surfacing can be jet washed, and with a permeable base, the water simply drains away. View our Aftercare & Cleaning Guide here.


The product can fully freeze and thaw 100's of times without any impact on strength. Permeable pores are contained throughout the system, allowing frost  and ice to be pushed out. This is one of the big advantages of the system.


Depending on size of the installers' company , smaller companies can install 150 sqm in a day as a maximum. However, larger companies could achieve 300 sqmor more.


An Approved installer we know very well and have supplied for some time. A local installer is one we have only recently begun supplying so haven't seen as many of their projects yet, although they could still be very good! On average 3 installers change to Vuba every week.


A real advantage of resin bound is that it can overlay existing old and tired concrete or tarmac (depending on cracks and joints, you may require repair treatments or joints within the resin). We do recommend, however, if you want a fully permeable system that the existing base is removed and replaced with open-grade tarmac. It is not recommended to be installed over flat brick paving. For the best results, we recommend to install a new permeable base such as the Vuba Base, permeable concrete or permeable asphalt.


VubaMac is a flexible and highly durable environmentally friendly base designed for resin bound. VubMac will form a montholithic bond with the resin bound surface when applied within the advised intercoaat period; creating the first ever fully functional resin bound surface. Find more information on VubaMac benefits here.